Facing problems with your computer? Want to know how to start Windows 10 in Safe Mode? Well, continue reading as we are proposing some ways to start Windows 10 in Safe Mode.
Safe Mode allows you to use Windows in its most minimal configuration. It only utilizes files and drivers that are strictly necessary.
In Safe Mode, for example, your screen will only have 16 colors and very poor quality, and you won’t be able to print documents or listen to audio. It also won’t run a lot of background apps.
Safe Mode was created to assist you in troubleshooting computer issues.
Windows 10 will sometimes launch in Safe Mode by default. However, you may need to start it in Safe Mode manually on occasion (e.g. if you get a blue screen error every time you start Windows). Other reasons could be some app is faulty and making your computer slow. Or maybe it is not opening.
Whatever the case may be, it is good to troubleshoot the computer by starting in Safe Mode.
How to Start Windows 10 in Safe Mode
Not many people know but there are many ways to start Windows 10 in Safe Mode. This post will show you how to start Windows 10 in Safe Mode manually through all the possible ways if one doesn’t work for you.
Method 1: Disrupt the Standard Boot Procedue for Three Times
If Windows 10 fails to boot properly three times, it defaults to an Automatic Repair mode on the fourth attempt. You can enter Safe Mode using this mode.
To activate the Automatic Repair mode, you must interrupt the usual boot process three times in a row: press the Restart or Power buttons on your Windows 10 PC to stop it from launching Windows 10 before it ends.
If you use the Power button to turn off the computer, you may need to hold it down for at least 4 seconds. The first page you see when Windows 10 enters Automatic Repair mode is one that says “Preparing Automatic Repair.”
Now, follow the steps below to enter Safe Mode:
- You may next be required to select an account to proceed. Select an Account with administrator privileges.
- After that, insert the administrator user account’s password. Skip to the next step if you are not requested for this information.
- Allow Windows 10 to attempt an automated diagnostic of your computer.
- Select Advanced Options on the Automatic Repair screen.
- On the next screen, select Troubleshoot.
- Go to Advanced Options on the next screen.
- Select Startup Settings from the Advanced settings menu. This option may not appear at first depending on your Windows 10 PC.
If you don’t, click on See other Recovery Options link.
- Now, you need to select Startup Settings option by clicking or tapping it.
- Click on Restart in Startup Settings screen.
After Windows 10 has restarted, you may select whatever boot options you want to activate. You have three alternative ways to enter Safe Mode
- Standard Safe Mode is activated by pressing the 4 or F4 key on your keyboard.
- Press 5 or F5 to enter Safe Mode with Networking.
- Press either 6 or F6 to enter Safe Mode with Command Prompt.
That is it, this is how to start Windows 10 in Safe Mode by disrupting the normal boot procedure three times. Now, you can do your tasks in the Windows 10 Safe Mode as you want.
Method 2. Activate Safe Mode in Windows 10 by Using Installation Media and Command Prompt
You can use a Windows 10 setup DVD or USB memory stick to boot your damaged PC with Windows 10 into Safe Mode if you have one on hand, or if you can make one. Then, from there, reboot your damaged Windows 10 PC and wait for the installation screen to load.
Now, follow the instructions below to know how to enter Windows 10 in Safe using the installation disk and Command Prompt.
- On Windows Setup screen, select your preferred language, time and currency format and keyboard layout. Select Next after that.
- In the lower-left corner of the screen, click on Repair your computer option.
- Choose Troubleshoot when asked which option you prefer.
- Select Command Prompt (Use the Command Prompt for advanced troubleshooting) on the Advanced settings menu.
- Type the following command in the Command Prompt window:
bcdedit /set default safe boot minimal.
When you press Enter on your keyboard, it says “The Operation Completed Successfully” after a few moments.
- Close the Command Prompt and go to the next step by selecting Continue.
When your computer restarts, Windows 10 enters Safe Mode. Make the desired modifications by logging in with a user account that has administrator capabilities.
Please Note: The problem with this technique is that it tells Windows 10 to start in Safe Mode by default unless you tell it differently.
Run the same method again and use the command: bcdedit /delete value /default safe boot to deactivate this setting and get Windows 10 to boot normally again.
Method 3: Enter Windows 10 in Safe Mode Using System Configuration
If you can log in to Windows 10, using the System Configuration tool, often known as msconfig.exe, is one of the simplest ways to boot into Safe Mode. Follow the steps below on how to enter Windows 10 in Safe Mode using the System Configuration option.
- Type System Configuration into the Taskbar Search, then click on System Configuration shortcut from the search results.
- Once the System Configuration window is opened, click on Boot Tab.
- Tickmark the Safe Boot option in the Boot settings section. Finally, choose Apply and then OK.
Windows 10 informs you that the new option will take effect only when you restart your computer.
You can choose “Exit without restart” if you still have work to accomplish. If this is not the case, select Restart to restart Windows 10 in Safe Mode.
Your system will start in Safe Mode once your system restarts.
Method 4: Use the Settings App to Access Windows 10’s Safe Mode
If you have access to Windows 10, you may also use the Settings app to enter Safe Mode. To know how to start Windows 10 in Safe Mode using Settings, follow the steps below:
- Click on Start button (Windows icon) on the extreme left-hand corner. Select Settings from here.
- Click on Update & Security Option.
- Select Recovery from the left-hand menu of the Settings window. Click on Restart Now button on the right side of the Advanced Startup section.
- Choose the Troubleshoot option once Windows 10 restarts.
The actions you must do from here are the same as those in the first technique in this guide. “Advanced settings -> Startup Settings -> Restart” is the course to take.
Then, on your keyboard, hit the 4 or F4 key to enter minimum Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.”
And that’s how you can start Windows 10 in Safe Mode using the Settings app if you can log in to Windows.
Method 5: Use the shutdown command in Command Prompt
This is another easy method to start Windows 10 in Safe Mode if you can still access the system. To do so, follow the steps below and see starting Windows 10 in Safe Mode using the Command Prompt is an option.
- Type CMD in Task Bar Search bar. Open Command Prompt from the list of results. Make sure to right-click on Command Prompt and select Run as Adminitrator.
- Once the Command Prompt opens, run the folllowing command:
shutdown.exe /r /o
This causes Windows 10 to reboot into its recovery mode. After you launch it, Windows 10 informs you that you will be signed out in less than a minute.
When you sign out of Windows 10, the “Choose an option” page appears, just as it did in the previous ways.
Select Troubleshoot from the drop-down menu and follow the procedures in the first way of this article.
Choose Advanced settings -> Startup Settings -> Restart on the next screen. Then, on your keyboard, press 4 or F4 to enter Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.”
The above two ways are for those users who can log in to their system but what if you can’t access it. Don’t worry, we have other solutions to start Windows 10 in Safe Mode if you can’t log in. Keep reading!
Method 6: Press Shift+Restart on the Sign-in Screen in Windows 10
If you can’t log in to Windows but can reach the sign-in page, you can press and hold the SHIFT key on the keyboard.
While keeping these keys held, click on the Power button, then select Restart from the menu that appears.
Windows 10 restarts, it prompts you to choose an option. Select Troubleshoot from the drop-down menu and follow the steps thereafter that we have listed in the above methods.
Use a user account with administrative credentials to enter Windows 10 Safe Mode and make the modifications you desire.
Method 7: Use a Recovery Device to Boot System in Safe Mode
You may construct a system recovery USB device in Windows 10. Create this USB recovery disc on another computer with Windows 10 if your PC isn’t working.
- Once you’ve established a USB recovery drive, start your Windows 10 PC or device from it and load the contents when prompted. The first screen prompts you to select a keyboard layout. Select the layout you wish to use, or if it isn’t mentioned, click or touch “Get additional keyboard layouts” to see the full list of options.
- Go to Troubleshoot after selecting the keyboard layout you wish to use on the Choose an option screen.
- The methods to boot into Safe Mode are the same as the first technique in this article, which is to follow this path: Advanced options -> Startup Settings -> Restart is the command to use.
- Then, on your keyboard, hit the 4 or F4 key to enter minimum Safe Mode, 5 or F5 to enter Safe Mode with Networking, or 6 or F6 to enter Safe Mode with Command Prompt.
And that’s there! Another method to start Windows 10 in Safe Mode using a USB recovery drive. Ain’t it easy if you are not able to login into your system?
Method 8: Press Shift + Restart on the Start Menu
Using the Start Menu is another approach to enter Safe Mode in Windows 10. To do this, follow the steps below:
- Hold down the SHIFT key on the keyboard.
- While holding down that key, click on the Start button.
- Select Power from the list of options.
- A menu will appear, click on Restart. Make sure you are holding the Shift key on keyboard during the whole process.
Windows 10 reboots and prompts you to choose a choice. Select Troubleshoot from the drop-down menu.
After that, repeat the procedures outlined in the first way of this tutorial. Go to “Advanced settings -> Startup Settings -> Restart” in a nutshell. Then, on your keyboard, press 4 or F4 to enter Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.”
Which Method You Chose to Start Windows 10 in Safe Mode?
These are all the ways that you can choose to start Windows 10 in Safe Mode. Well, all the methods we mention here are easy and can be easily followed by everyone. The only major difference is whether you can access your system or not.
For that, we have tried to put all the possible ways through which you can start Windows 10 in Safe Mode even if you can’t log in to Windows.
Whatever method you choose, we hope this guide will be useful and you will be able to fine-tune your damaged Windows system.
Do not forget to let us know which of these methods to start Windows 10 in Safe Mode you selected?