10 Ways to Fix ERR_NETWORK_CHANGED Error in Windows

 May 5, 2022

By  Gregory

Are you recently getting ERR_NETWORK_CHANGED Error in Windows 10? Got confused but couldn’t find a way to resolve the error? Don’t worry, find out the ways that will help you to fix ERR_NETWORK_CHANGED Error in Windows 10 error.

Your internet connection or browser may be stopping you from loading the website if you see the message ERR_NETWORK_CHANGED on Google Chrome in Windows 10. This is not an uncommon problem and many users complained that they have faced this ERR_NETWORK_CHANGED error in Windows 10 from time to time.

Related: Why is My Computer Running So Slow?

This article is mainly focused on finding the solutions to fix the ERR_NETWORK_CHANGED error in Windows 10 so that you can connect to the internet. 

In the error message, Chrome plainly states that the network is unavailable, and therefore it won’t be possible for you to access the internet on your Windows device.


So, without further delay, have a look at all the solutions to fix the ERR_NETWORK_CHANGED error in Windows 10. It may be fixed by following the best solutions provided below. Check them one by one:

1. Restart your Computer and Modem

In certain cases, a simple click of a button will take care of the issue. You don’t have to go through any complicated processes to get your internet back up and running.

The first thing you can do to solve the problem is either restart your system or router. A lot of errors get resolved with a simple reboot. We would suggest you to restart your computer first and then restart your modem. This will hopefully resolve ERR_NETWORK_CHANGED error in Windows 10. 

Once your system and router restarts, go to the browser and check if you can access the internet. If not, the problem is still there and you need to check out below solutions to solve the error.

Related: How to Fix Media Creation Tool Error 0x80042405 – 0xa001b?

2. Reset your IP/TCP

You will encounter errors if there’s a misconfiguration in your IP/TCP settings. We will reset IP/TCP to see if the problem persists or gone. To reset your IP/TCP in Windows 10, please follow the below steps: 

  1. Type cmd in the Start menu’s search bar. You will see Command Prompt in the search results. Right-click on Command Prompt and select Run as administrator from the drop-down menu.
  2. You need to type these below commands once after the other. Make sure you hit enter after each command.
    • ipconfig/release
    • ipconfig/flushdns 
    • ipconfig/renew
  3. Once you are done with above following commands, exit the Command Prompt.
  4. You have to open Command Prompt once again the same you opened before. Type the following below commands and press Enter after reach command
    nbtstat – r
    netsh int ip reset
    netsh winsock reset

After this, you need to restart your computer. Check to see whether the problem persists after IP/TCP reset. If not, follow the below solutions to solve the ERR_NETWORK_CHANGED error.

Related: How to Fix Win32kfull.sys BSOD Error?

3. Run the Internet Connection/Network Troubleshooter 

Many people don’t know but Windows have an excellent in-built Troubleshooter available in Windows 10. It can help you to identify most of the Windows 10 problem and shows you the ways to fix it instantly. Errors in a web browser can be found too and fixed with the Troubleshooter.

Just follow these bellow instructions to how to use Troubleshooter to fix ERR_NETWORK_CHANGED error in Windows 10: 

  1. Click on the Start (Windows icon on the extreme left hand corner) and select Settings from here. 
    Click on Settings App
  2. From the Settings app, click on Update & Security option. 
    Click on Update and Security
  3. From left pane, click on Troubleshoot. After that, you need to click on Additional Troubleshooters from the right pane. 
    Click on Troubleshoot
  4. Here, you need to select Internet Connections. A drop-down will appea, select Run the Troubleshooter to proceed. It will start finding the problems and might take some time. You need to wait for the process to complete. 
    Run the Troubleshooter

When it’s done, it will automatically identify and fix the problem. To preserve the changes you’ve already made, restart your computer. The ERR NETWORK CHANGED problem should be solved by this method. If not, we will try other way to fix the problem.

Related: Hard Drive Not Showing Up – Quick Fix

4. Verify the DNS Settings on your System

The DNS settings should be checked if none of the previous solutions worked for you. We will try to see if there’s no problem in DNS settings. 

Follow the below steps to check DNS settings in Windows 10: 

  1. Type Control Panel into the Task Bar Search menu bar. Open Control Panel once you find it in list of results. 
    Open Control Panel
  2. Once Control Panel is opened, you need to select Network and Sharing Center from the list of options. 
    Open Network and Sharing Center
  3. In the left pane of the Network and Sharing Center, click on Change Adapter Settings.
    Click on Change Adapter Settings
  4. A new window will open. Right-click on the network adapter and select Properties. 
    Right click on Network Adaptor
  5. Select Internet Protocol Version 4 (TCP/IPv4) under This connection uses the following items window and choose Properties to proceed further.
    Click on IP4 Properties
  6. If Obtain an IP address automatically is already selected, make sure to use the option Use the following DNS server addresses. Add the servers and in Preferred DNS server and Alternate DNS server respectively. Click on OK. Switch to automated DNS and retest if you previously had DNS servers set up. Click on OK and restest the settings again. 
    Change the DNS Server

This should resolve any DNS related issues. Let us reset your network card fully if you’re still getting ERR NETWORK CHANGED problem in Windows 10. 

  1. Go to Network and Sharing Center in the Control Panel again. Select the Change adapter settings option in the left pane as you did previously.
  2. A new window will open. From here, you need to right-click on the network adaptor and choose Disable from the context menu. If you notice a ‘lost network connection’ notification and the symbol turns grey, that’s normal.
    Choose Disable
  3. Repeat the previous step, this time select Enable from the context menu of your network adapter. Retest after allowing Windows to load the settings. 

Resetting the network card has always cured the problem. That doesn’t mean it won’t happen again, but at least you’ll know how to handle it this time. Even if resetting the network card won’t solve the problem, don’t worry we have other solutions that will resolve ERR NETWORK CHANGED error in Windows 10.

Related: Easy Methods to Fix USB Device Not Recognized

5. Either Disable Ethernet or WiFi

WiFi and Ethernet are the most common ways to connect to the Internet on most PCs. In order to determine if your PC supports both wireless and wired connections and if both are enabled, check to see if there are any issues with the connection. 

Remove the ethernet cord or disable WiFi on your laptop to fix this problem. Now that the internet can be accessed solely via a single point of connection, there is no chance of a disruption.

Related: How to Fix White Screen of Death Issue?

6. Disable VPN and Proxy Server

If you are using VPN or any proxy service, there are chances that this could be the reason causing ERR NETWORK CHANGED error and restricted access to the internet. Try to disable VPN and Proxy Server in Windows 10 and see if the problem still persists.

Look at the below steps on how to do so: 

  1. Click on the Start (Windows icon) and open Settings. 
  2. Once the Settings app is opened, click on Network & Internet from the list of options. 
    Click on Network and Internet
  3. From the left pane, click on Proxy tab. On the right side, you have to disable all the options that are turned on.  
    Disable Proxy Server

This is how you can disable Windows 10 to automatically detect settings for Proxy server and hopefully you will able to access the internet from your browser. 

Related: How to Repair Registry in Windows 11?

7. Update the Network Adapter

In addition, an out-of-date device driver might create a variety of issues. Keeping them up-to-date guarantees that you have the most recent fixes for any faults or mistakes that may arise. Follow the below steps to check how to update the network adapter in Windows 10: 

  1. Right-click on Windows Icon on the extreme bottom left corner of the screen. A menu will appear, click on Device Manager option. 
    Open Device Manager
  2. Right-click on the installed network driver and choose Update driver
    Click on Update Driver

Windows will automatically search for and install updated driver software for network adaptor. Once its done, restart your computer. Check to see whether the problem has been fixed by reopening the web browser.

Related: How to Overclock GPU? [2022 Guide]

8. Disable and then Re-enable the Network Adapter

Generally, network adapters are the main cause of ERR NETWORK CHANGED error in Windows 10. We will disable and re-enable to see if the problem is resolved or not. th

Follow Step no.1 and 2 from the above solution and rather than clicking on Update driver, you have click on Disable device and then re-enable the network adapter after few seconds. That’s it, this generally solves the problem. 

Make sure to restart your computer before you check. 

Related: How to Fix Stop code CRITICAL PROCESS DIED

9. Flush DNS Cache

Most systems and DNS applications automatically store IP addresses. We need to flush DNS cache to remove what system has restored and see if you are able to access the internet after that. This is similarly a straightforward process, requiring only a command to be typed into the Command Prompt. 

Check the steps below to flush DNS cache in Windows 10: 

  1. Type CMD in the Task Bar Search menu bar. Open Command Prompt by right-clicking on it and choose Run as an administrator
  2.  Type ipconfig /flushdns into the Command Prompt window and hit Enter.
    Open Command Prompt

Restart your computer after doing this and hopefully this will get rid of ERR_NETWORK_CHANGED Error in Windows 10. 

Related: Fix ZOOM Video Not Working

10. Disable the Power Saver Mode 

In Windows 10, the wireless adapter stops working if the power saver mode is on. This setting might cause a lot of problems with the internet and the network. ERR_NETWORK_CHANGED error is one of the problem. We need to disable the power the power saver mode. To do that, please follow the steps below:

  1. Open the Device Manager as shown in solution no.8. Right-click on the installed network driver and select Properties
    Select Properties
  2. A new window will open, open Power Management tab. From here, make sure you tick-off/turn off “Allow the computer to turn off this device to save power” feature. Click on OK once you are done. 
    Click on Power Management

Turning this feature off makes sure wireless adapter don’t go to sleep with your computer. 

Related: Quick Ways to Fix COD Warzone Dev Error 6068

Ending Note

Err network change is a common problem when it comes to internet errors and network interruptions. When Google Chrome in Windows 10 detects or encounters a change in the IP address of a user’s machine, this sort of error occurs.

Error network changes can occur because each device has a unique and distinct UP address assigned to it. But, we are sure using the above solutions to fix the ERR_NETWORK_CHANGED error in Windows 10 helped you to solve the problem.

If you are facing any difficulties in following any of these solutions, do let us know in the comments section below and we will try to resolve it soon. Also, do not forget to tell which one of these solutions to fix  ERR_NETWORK_CHANGED error worked to help our readers.



{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}