9 Easy Ways to Fix a Driver Power State Failure Issue in Windows 10

Looking for ways to fix a driver power state failure issue in Windows 10? Well, to be honest, you can easily fix Windows 10 driver power state failure issue. Follow the methods that we have mentioned in this article.

There are many reasons why blue screens occur. Your Windows PC may display a Blue Screen of Death (BSOD) and you may be inclined to assume the worst. In many cases, a Blue Screen of Death is the result of a problem that can be fixed with a simple solution but not many people know.

A “driver power state failure” error is one of the BSODs some users see. Troubleshooting this issue is often fairly straightforward and seldom impossible. It is typically a result of a faulty device driver. You can fix driver power state failure BSOD error in Windows 10 by following some easy solutions that we will be discussing with you in this article.

What is Driver Power State Failure Error?

Before we know more about the solutions to fix Driver Power State Failure error in Windows, it is crucial to understand what this is?

Incompatible drivers can cause a Blue Screen of Death as a result of driver power state failure. The blue screen of death, synonymous with the blue screen of death error 0x0000009F, is caused by driver errors. Many factors can lead to this error. The most common reason is when you boot up your computer. It’s advised that you update your drivers with driver updater software since this error is often caused by your drivers.

What Causes Driver Power State Failure?

Blue Screen of Death errors with stop codes “driver power state failure” is usually triggered by power control issues with connected devices. Windows assumes this is a critical error if the device goes into sleep mode while you’re using it or if it does not come out of sleep mode when you try to use it.

There could be several reasons that trigger Driver Power State Failure in Windows 10. Some of these errors that can easily be recognized are below:

Windows may not be able to control power settings for connected devices if a device driver is out-of-date or faulty.
By using the System File Checker tool, you can attempt to repair corrupt system files.
Certain devices will not enter a low-power or sleep mode if the power settings on your device are changed, including disabling sleep or hibernation.
Most often, external peripherals, such as Bluetooth or USB devices, or certain high-power components within the computer are responsible for this problem.

How to Fix Driver Power State Failure?

Thankfully, we have a simple workaround to solve Driver Power State Failure in Windows 10. It may not be necessary for you to try them all. Generally, take a top-to-bottom approach until you find the one that suits you.

So, without wasting any further time, have a look at all the possible solutions that will help you to fix Driver Power State Failure in Windows 10.

1. Adjust your Power Settings

The first solution that we would advise you to follow is to adjust your power settings. This will help you to fix Windows 10 Driver Power State Failure problem. To do so, follow the steps below:

Type Control Panel in Taskbar Search bar. Open Control Panel once you find it in the search results.
Select Power Options from the list.
In the next window, click on Choose what the power button does option from the left pane.
Click on Select Change settings that are currently unavailable option.
Uncheck below options:
Turn on Fast Startup (Recommended)
Sleep
Hiberanate
Then, click the Save changes button.

2. Modify your Power Plan Settings

If changing your Power Settings doesn’t fix the Driver Power State Failure in Windows 10, we suggest you modify your power plan settings. Check the steps below on how to do so:

Open Control Panel. Once the panel is opened, click on Power Options.
Click on Change Plan Settings from the right pane settings.
Choose Change Advanced Power Settings option.
Now you will see a list of options. Make sure that Sleep and Hibernation are set to Never in the Sleep section. Check that everything is set to Do nothing in the Power buttons and lid section. To save your changes, click Apply and OK.

Users suggest removing the battery from a laptop and connecting it to the power outlet if you are using one.

Hibernate and sleep will no longer function after making these changes, and the issue should be resolved.

3. Get the Latest Drivers

To fix the stop code Driver Power State Failure on your PC, you should update your drivers. Manually doing it is possible, but some tools can make the process easier.

The steps are as follows:

Download DriverFix on your system. Once it is downloaded, click on .exe file to install it.
Run the program and the software will detect any faulty drivers.
It will then display a list of the problematic drivers, and you can select which ones you’d like to be fixed.
Let DriverFix install the latest drivers for you.

To make the changes effective, restart your computer. This will hopefully fix the Driver Power State Failure BSOD error in Windows 10.

4. Start in Safe Mode and Uninstall any Recently Installed Drivers

It would be advisable to remove any recently installed drivers on your system by entering in the safe mode. To do so, please follow the below steps carefully.

Make sure that your USB drive is set as the first boot device in the BIOS.
Insert the Microsoft Windows 10 boot DVD in your CD/DVD drive.
Reboot your Windows 10 computer.
Any key on your keyboard will boot your Windows 10 installation media CD when it says Press any key to boot from a DVD or CD.
As soon as you boot from the Windows 10 bootable media, you will need to left-click or click on the Next button.
On the next screen, select the Repair Your Computer option by left-clicking or tapping it.
Choose the Troubleshoot option from the Choose an option window that appears.
Click or tap on Advanced options in the next window.
Select Command Prompt from the Advanced Options window by left-clicking or tapping.
You need to enter C: in the command prompt). Hit Enter.
After that, you will need to type the following in the Command Prompt: BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
Then, type EXIT and hit Enter.
Restart your PC after removing the Windows disc.

Also Read: How to Fix Stop code CRITICAL PROCESS DIED

It is then necessary to enter Safe Mode and remove any recently installed drivers. Simply do the following:

Keep pressing F8 after the restart to start the computer.
You’ll see a list of options. Choose Safe Mode.
The Device Manager will open when Safe Mode is activated.
Right-click on the last drivers you installed recently and select Uninstall device from the menu.
You can reboot Windows 10 normally to see if you still receive an error.

It may be necessary to remove another recently installed driver if the problem persists. Repeat this process until your PC starts working properly.

5. Conduct an SFC Scan

To fix Windows 10 Driver Power State Failure, you need to run the SFC command. Check below steps on how to perform an SFC scan in Windows 10:

Type CMD in Task Bar Search bar. Right-click on Command Prompt and select Run as Adminitrator option from the drop-down menu.
Type SFC /scan in the Command Prompt and press Enter.
A scan will now begin. Do not interrupt a SFC scan, which can take about 10 minutes.

Users recommend running a DISM scan instead of an SFC scan if you are unable to run an SFC scan, or if the scan fails to solve the issue. Here’s how to do it:

Run Command Prompt as administrator.
Type these commands below:
DISM.exe /Online /Cleanup-image /scan health
DISM.exe /Online /Cleanup-image /Restorehealth
If the problem persists, run both commands again.

Run an SFC scan after the DISM scan if you weren’t able to do so before. You should be able to eliminate the Driver Power State Failure message in Windows 10 after running both scans.

6. Modify Nvidia Control Panel’s Power Settings

A Driver Power State Failure error can occur due to your power settings, according to users. If you follow the steps below, you will be able to fix the problem which occurs while using Nvidia graphics.

Navigate to the Nvidia Control Panel.
From the left-hand side, choose Manage 3D settings.
Choose your dedicated graphics card as a preferred graphics processor in the right pane. Select Prefer maximum performance under Power management mode.
Save the changes and see if that works.

Try switching to maximum performance if you’re having trouble, as users said it fixed the problem for them.

If you use a laptop, be aware that this mode will use more battery power. AMD’s Catalyst Control Center offers similar settings for AMD graphics.

Related: 12 Best Windows 11 Apps

7. Change the Power Options on your Device

Try to fix Windows 10 Drive State Power Failure error by adjusting the power options on your computer system. To do so follow the steps below:

Right-click on Start Button (Windows Icon). Open Device Manager from the menu options.
Click on the Display Adapters to expand it. Right-click on network adapter and choose Properties from the drop-down menu.
A new window will open. Click on Power Management tab. From here, remove the checkbox “Allow the computer to turn off this device” so that it saves energy. Save your changes by clicking OK.

Hopefully, this will resolve Driver Power State Failure BSOD in Windows 10.

8. Remove or Disable your Antivirus Software

Corrupted repositories and missing Windows files are some of the most difficult PC issues to fix. Your system may be partially broken if you are having difficulty fixing an error.

It is important to have antivirus software, but sometimes it can interfere with Windows and result in Driver Power State Failure errors.

Our recommendation for fixing this issue is temporarily to disable your antivirus software. If not, your antivirus software may need to be uninstalled. Remove your antivirus software.

Check if the issue persists after you have removed your antivirus completely. You may need to update your antivirus software or switch to a different antivirus program if not.

9. Upgrade your Graphics Card Drivers to the Older Version

Launch Device Manager. Select your graphics card from the Display adapters section by double-clicking it.
Click on Properties window, and select Roll Back Driver button under the Driver tab.
The process will take a moment to complete.

To restore your graphics card driver, you’ll need to uninstall it from Device Manager if the Roll Back option isn’t available. If you prefer, you can completely remove all files associated with your graphics card by using Display Driver Uninstaller.

Visit the manufacturer’s website to download the older version of the driver after removing the driver. Determine whether the problem was resolved after installing the driver.

However, you can try this solution with other graphics cards as well if the issue affects Nvidia cards. Your graphics card drivers can cause Stop code Driver Power state failure error. Reverting to the older driver is recommended to fix Driver Power State Failure in Windows 10.

Is Driver Power State Failure in Windows 10 Solved?

By trying out these few fixes, you can resolve Driver Power State Failure in Windows 10.

Your power settings can sometimes contribute to Windows Driver Power State Failure errors. It is possible to turn off many devices to conserve power, but this can sometimes lead to this issue.

It is our longing that the information in this article will assist you in trying to resolve the driver power state failure error in Windows 10.

The troubleshooting steps are explained in minute detail so that you can complete them with no issues. The troubleshooting steps are outlined in a way that will help you resolve this issue on your own. Give each a try until Windows 10 Driver Power State Failure is fixed.

Also, if you facing any confusion while resolving the Driver Power State Failure BSOD error in Windows 10, do let us know in the comments section below. We will try to resolve it as soon as possible.

Gregory

BayCitizen.org

baycitizen@gomail.world

As an Amazon Associate Baycitizen.org earns commission from qualifying purchases.